熱門資訊> 正文
2026-11-05 10:11
惠生工程在阿聯酋阿布扎比舉行的Flex-to-X工程產品平臺全球發佈期間,正式介紹了MegaFlex2.0一體化綠氫工程解決方案的最新進展。繼2025年6月首次推出MegaFlex后,本次升級重點面向高温、沙漠及缺水等複雜環境,擴展產品架構的適用條件與工程配置選項,以更好匹配不同地區的項目需求。
During the global introduction of the Flex-to-X engineering product platform at ADIPEC2026in ABU DHABI,UAE,Wison Engineering presented the latest evolution of MegaFlex2.0,its integrated green hydrogen engineering solution.First introduced in June2025,MegaFlex is now being developed with expanded engineering configuration options for demanding conditions,particularly high temperatures,desert environments and limited freshwater availability.
延續產品基礎,拓展應用邊界
Building on the Original Engineering Product MegaFlex的開發初衷,是降低項目資本投資、提升交付可預測性、控制實施風險及支持全球複製。其工程產品基礎包括三項相輔相成的核心能力:以ReIPS(惠生自主研發的可再生能源仿真優化平臺)開展系統配置和運行策略的綜合優化;通過標準化工程架構、設計基準及接口沉澱可複用的工程知識;採用模塊化建造與交付模式,減少對現場施工條件的依賴。
MegaFlex was conceived to address green hydrogen project economics,execution risk,delivery predictability and the potential for global replication.Its foundation combines three complementary capabilities:ReIPS-supported integrated system evaluation(ReIPS is Wison's proprietary Renewable EnergyIntelligent Programming System),standardized engineering architectures and defined Interfaces,and modular fabrication and delivery.
MegaFlex2.0承襲上述核心基礎,重點針對高温、沙漠、缺水等更具挑戰性的氣候、資源和場地條件,拓展工程配置選項,並根據項目特定要求開展必要的專項定製設計。
MegaFlex2.0builds on that foundation,expanding engineering configuration options for more challenging climatic,resource and site conditions.It combines reusable engineering solutions with targeted project-specific design where required.
面向不同條件的三類配置方向
Three Application-Specific Configuration Directions
高温、沙塵和水資源約束往往在同一項目中同時疊加出現,共同影響冷卻方式、設備選型、維護安排及項目經濟性。MegaFlex2.0堅持一體化系統工程,而非將各項環境適配措施視為彼此獨立的設備升級。當前重點配置方向包括:
Heat,dust and water scarcity may occur together,influencing cooling,equIPMent selection,maintainability and project economics.MegaFlex2.0therefore approaches adaptation through integrated engineering rather than isolated equIPMent modifications.Its configuration directions include:
沙漠適應型
Desert-Adapted
面向高温、沙塵及乾旱環境,重點考慮熱管理和冷卻方案、防曬與沙塵防護、鹽霧防腐措施和模塊化交付。
Desert-Adapted MegaFlex:Engineering considerations for high ambient temperatures,dust and arid conditions,including thermal management,cooling choices,sunlight and dust protection,relevant corrosion protection for salt spray and modular execution.
節水型
Water-Efficient
面向淡水緊缺或取水成本較高的地區,提供多種類型冷卻方案,以減少水分蒸發,採用廢水回用方案,以減少水耗,支持能耗、投資及運行成本之間的綜合權衡。
Water-Efficient MegaFlex:Multiple cooling options are provided to reduce evaporative loss,together with wastewater reuse schemes to cut water consumption,enabling evaluation of water consumption alongside Energy demand,CAPEX and OPEX.
土地集約型
Space-Efficient
針對用地受限場址,探索更緊湊的設備與模塊佈置、適當的立體化方案,併兼顧施工、安全、操作和維護空間。
Space-Efficient MegaFlex:Compact equIPMent and module arrangements,and vertical layout options where appropriate,with continued attention to safety,Construction,access,operation and maintenance.
上述配置方向體現MegaFlex2.0的產品演進路徑,我們結合差異化場址工況持續迭代打磨各種方案,並將在工程實踐中得到驗證。
These are application-specific configuration directions within MegaFlex2.0.We KEEP refining each solution for diverse site conditions,and they will be validated through real engineering deployment.
系統優化服務於更好的工程決策
Optimizing the Plant as an Integrated System
在系統配置階段,尤其針對大規模可再生電力的離網、弱電網項目時,ReIPS基於8,760小時逐時仿真分析,對可再生能源出力、儲能、電解制氫與下游配套系統開展全局尋優,提供最佳系統配置方案以降低初始投資,並輸出運行控制策略以降低運行成本。面向複雜工況,核心是統籌各個子系統協同全局優化,而不是孤立優化單台設備。
At the system configuration stage,particularly for off-grid and weak-grid projects powered by large-scale renewable electricity,ReIPS adopts8,760-hour simulation analysis to deliver co-optimization across renewable power output,Energy storage,electrolytic hydrogen production and downstream systems.It screens configuration alternatives to cut capital expenditure and generates operational control strategies to reduce operating expenditure.For complex operating conditions,the focus lies in coordinated sizing of all subsystems,rather than isolated optimization of individual equIPMent.
對客户而言,這些工作旨在支持更符合當地條件的工程方案,增強成本、進度和運行假設的可預測性,為CAPEX/OPEX優化與投資決策,提供更紮實的技術支撐。
For project developers,the expected value is better alignment with local conditions,more transparent engineering trade-offs and stronger inputs to cost,schedule and operating assumptions.Potential CAPEX/OPEX and bankability benefits depend on each project's technical scope,procurement conditions and subsequent validation.
在Flex-to-X平臺框架下持續發展
Evolving Within Flex-to-X MegaFlex是Flex-to-X的綠氫工程產品系列。惠生工程持續推進共享架構、接口治理及系統優化能力在各種產品中的複用和積累,並依託客户需求、技術合作和項目經驗,持續迭代配置方案。
MegaFlex is the green hydrogen solution family within Wison's evolving Flex-to-X engineering product platform.Wison is developing shared engineering architectures,Interface practices and optimization capabilities that may support integration with other solution families where technically appropriate.Product configurations will continue to evolve through customer requirements,technology partnerships and lessons from projects.
惠生工程CTO劉恆偉博士表示:「2025年推出MegaFlex時,我們希望通過系統集成、標準化與模塊化,讓綠氫項目更具競爭力、可預測性和可複製性。MegaFlex2.0將這套思路進一步延伸到更復雜的環境條件。我們的原則始終不變:優先採用成熟、可複用的方案,針對特定條件開展定製化設計。產品升級的價值,最終將在具體項目的工程經濟性和實施表現中得到檢驗。」
「When we introduced MegaFlex in2025,our ambition was to make green hydrogen projects more competitive,predictable and repeatable through integrated engineering,standardization and modular delivery,」said Dr.Hengwei Liu,Chief Technology Officer of Wison Engineering.「With MegaFlex2.0,we are extending that approach to more demanding operating environments.The principle remains the same:configure what is repeatable,and engineer what is unique.The value of each improvement ultimately will be demonstrated through real project economics and execution.」
MegaFlex2.0的持續迭代升級離不開客户、制氫設備提供商、供應鏈夥伴及惠生跨專業工程團隊的協同。惠生正在結合項目反饋與適用的工程驗證,不斷豐富其配置邊界和可複用工程成果。
Wison Engineering will continue advancing MegaFlex2.0with customers,hydrogen equIPMent OEMs,supply-chain partners,and its multidisciplinary teams,incorporating appropriate engineering evidence and project feedback into future configurations.